New 20/lot boxed stereo universal CC1/CS1AD ceramic cartridge Tonabnehmer + ADC Type 7-point connector 1/2' Straight Tonearm Headshell OFC/Pure Silver/PCOCC lead wire assembly for Technics, JVC, Sansu

You are bidding on a lot of cartridge and headshell assembly in the color or material shown above. These are brand new products in original factory's package.

Please note this is not an original TECHNICS / Audio-Technica / SHURE / EMPIRE / PHILIPS / ORTOFON / Dual / SONY / SANYO / Mitsubishi ... And tonearm / turntable in photoes are not include.

Type: High quality stereo universal CC1/CS1AD ceramic cartridge + High quality ADC Type 7-point connector 1/2' Straight Tonearm Headshell OFC / Pure Silver / PCOCC leadwire assembly.

(Each piece is an assembled and tested finished product, just same as photoes shown above)

Model: CC1/CS1ADH3OFC/OCC/PSW

Lot size: 20 pcs assembly per lot, for example, if you need 100 pcs, just buy 5 lots.

Weight: about 12g/pcs

Package: Everyone box, containing 1pcs stereo universal CC1/CS1AD ceramic cartridge + High quality ADC Type 7-point connector 1/2' Straight Tonearm Headshell OFC / Pure Silver / PCOCC leadwire assembly, 1pcs sponge soft cushion. Fully transparent, high quality, abrasion resistant and scratch-resistant crystal gift box

stereo universal CC1/CS1AD ceramic cartridge:

CS1AD: Plastic cantilever stereo ceramic cartridge with 1/2' mount

CC1AD: Aluminium alloy cantilever stereo ceramic cartridge with 1/2' mount

Easy to install;
Excellent sound quality and strong tracking ability;
Output voltage (at 1k Hz, 5 cm/sec):  300 mV ± 3dB;
Channel balance (at 1kHz): less than 2 dB;
Channel separation (at 1kHz): more than 10 dB;

Tracking ability: more than 80μ
Tracking force: 5.0g (4 ~ 6g);

Weight: about 5g;
Stylus Tip: Top quality stereo transparent diamond stylus. The stylus tip is from a professional manufacturer who have supplied in the past 40 years to all the OEM manufacturers such as Philips PSR, TETRAD, ORTOFON, DUAL and many others. This stylus is improved according to our long term production experience, it can let your cartridge do wonderfully output. So we can assure you that we supply to you the same quality of tips as original even better.

ADC Type 7-point connector 1/2' Straight Tonearm Headshell:

Connection: ADC Type, 7-point

Length: 49 mm

Color: black

This high quality headshell will fit most turntables with a 'Straight' shaped tonearm (usually found in Japanese turntables like Technics, JVC, Sansui, Kenwood, etc) that pivot from the right rear corner of the deck. FITS "MOST" EUROPEAN & JAPANESE TONEARMS.

Suitable for 1/2" mount cartridges 

LEADWIRE:

oxygen free copper (OFC):

Each color leadwire is made up of 1 pcs UL1007 / 28AWG oxygen free copper (OFC) wire, and both ends are manually welded with terminals one by one. Color heat shrink tubes are used to distinguish the sound channel for easy installation.  

5N Pure Silver litz wire:

30AWG 5N Pure Silver litz wire is the best wire for faster transmission speeds, lossless data and cleaner sound. It's 0.55mm outer diameter, litz construction 7 strands and each strand is 0.1mm diameter 99.999+% Pure soft annealed silver wires in oversized PTFE Teflon insulation. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. 99.999+% silver transmits electrical signals faster and with less distortion than ordinary OFC wires. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable. Our silver is produced using the most up to date continuous casting methods in one of the largest and most stringently tested facilities in the world. Every piece leadwire is made of 2 pieces transparent 30AWG FURUKAWA 5N Pure Silver litz wires and litz construction for much more cleaner sound.

PERFECT CRYSTAL OCC (PCOCC) wire:

The 30AWG PERFECT CRYSTAL OCC (PCOCC) wire is 0.55mm outer diameter. It's litz construction 7 strands and each strand is 0.1mm diameter 99.999% 5N PERFECT CRYSTAL OCC (PCOCC) wires in oversized PTFE Teflon insulation for a more cleaner sound. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable.  PCOCC is some of the finest copper wires available for audio and lends itself perfectly to the delicate signal transfer between your cartridge and headshell.  Unlike common manufacturing processes, the PCOCC copper wires undergo a tightly controlled and extended cooling process resulting in an ideal, homogeneous structure. This 5N (99.999%) PCOCC materials is from FURUKAWA JAPAN. Every piece leadwire is made of 2 pieces transparent 30AWG PERFECT CRYSTAL OCC (PCOCC) wires and litz construction for much more cleaner sound. That's means every one set leadwire we use 8 pieces 30AWG PERFECT CRYSTAL OCC (PCOCC) wires.