New 20sets/lot Cartridge hold headshell OFC/Pure Silver/PCOCC lead wire for TAS-8 Elac Miracord46 PC810 820 830 831

You are bidding on a lot of Cartridge carrier hold headshell in the color or material shown above. These are brand new products in original factory's package.

Please note this is not an original TECHNICS / Audio-Technica / SHURE / EMPIRE / PHILIPS / ORTOFON / Dual / ELAC / SONY / SANYO / Mitsubishi ... And the cartridge, tonearm, turntable in photoes are not include.

Type: High quality OFC / Pure Silver / PCOCC leadwire 1/2 Inch Cartridge hold headshell for Elac Miracord46 PC810 820 830 831 TAS-8 TAS8

Lot size: 20 pcs per lot, for example, if you need 60 pcs, just buy 3 lots.

Weight: about 6g/pcs

Package: Everyone 1 set containing 1pcs High quality OFC / Pure Silver / PCOCC leadwire 1/2 Inch Cartridge hold headshell, each 2pcs of M2.5x3, x6, x8, x10, x12, x14, x16, x18, x20, x25 mm  stainless steel screws, 20 pcs 2.5x4.5x0.5 Nylon WASHERS, 1pcs M2 Allen Hex Nut Wrench, 1pcs Double M2.5 aluminum rectangular nut

For Elac Miracord46 PC810 820 830 831 TAS-8 tonearm turntable.

True injection molded plastic, not a 3D print.

Has the same interior and exterior dimensions as the original.

Tinned copper contact wire and hand soldered cartridge lead wires for a superior sound.   

LEADWIRE:

oxygen free copper (OFC):

Each color leadwire is made up of 1 pcs UL1007 / 28AWG oxygen free copper (OFC) wire, and both ends are manually welded with terminals one by one. Color heat shrink tubes are used to distinguish the sound channel for easy installation.  

5N Pure Silver litz wire:

30AWG 5N Pure Silver litz wire is the best wire for faster transmission speeds, lossless data and cleaner sound. It's 0.55mm outer diameter, litz construction 7 strands and each strand is 0.1mm diameter 99.999+% Pure soft annealed silver wires in oversized PTFE Teflon insulation. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. 99.999+% silver transmits electrical signals faster and with less distortion than ordinary OFC wires. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable. Our silver is produced using the most up to date continuous casting methods in one of the largest and most stringently tested facilities in the world. Every piece leadwire is made of 2 pieces transparent 30AWG FURUKAWA 5N Pure Silver litz wires and litz construction for much more cleaner sound.

PERFECT CRYSTAL OCC (PCOCC) wire:

The 30AWG PERFECT CRYSTAL OCC (PCOCC) wire is 0.55mm outer diameter. It's litz construction 7 strands and each strand is 0.1mm diameter 99.999% 5N PERFECT CRYSTAL OCC (PCOCC) wires in oversized PTFE Teflon insulation for a more cleaner sound. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable.  PCOCC is some of the finest copper wires available for audio and lends itself perfectly to the delicate signal transfer between your cartridge and headshell.  Unlike common manufacturing processes, the PCOCC copper wires undergo a tightly controlled and extended cooling process resulting in an ideal, homogeneous structure. This 5N (99.999%) PCOCC materials is from FURUKAWA JAPAN. Every piece leadwire is made of 2 pieces transparent 30AWG PERFECT CRYSTAL OCC (PCOCC) wires and litz construction for much more cleaner sound. That's means every one set leadwire we use 8 pieces 30AWG PERFECT CRYSTAL OCC (PCOCC) wires.