New 50set/lot high quality hand welded 1.2/1.3 terminal oxygen free copper (OFC) leadwire for turntable tonearm headshell cartridge

You are bidding on a lot of high quality hand welded 1.2/1.3 terminal oxygen free copper (OFC) leadwire in the color or material shown above. These are brand new products in original factory's bulk package.

Type: high quality hand welded 1.2/1.3 terminal oxygen free copper (OFC) leadwire

Lot size: 50 sets ( every 1 set = 4 pieces, every color 1 piece ) lead wires per lot

Leadwire: red, white, blue and green 4 pieces OFC wires, each piece total length of 50mm.

Each color leadwire is made up of 1 pcs UL1007 / 28AWG oxygen free copper (OFC) wire, and both ends are manually welded with terminals one by one. Color heat shrink tubes are used to distinguish the sound channel for easy installation.

Terminal: phosphor copper and 24K gold plated, for 1.2/1.3mm two types of cartridge pins (description below)

Terminals are welded on leadwire by hand with lead-free environmental protection solder and equipment one by one to ensure high electrical conductivity, high reliability, durability and long life. Quality and performance are much more better than most of the pressing terminal wires!

Heat shrink tube: ROHS environmental protection material, red, white, blue, green and black heat shrink tubes are used to distinguish ports. Black is used for headshell, and color is used for cartridge, so the difference between terminals 1.2 and 1.3 lies in the color end.

Mount on cartridge according to the color of shrink tubing:

BLUE = LG (left ground)

GREEN = RG (right ground)

WHITE = L (left positive)

RED = R (right positive)

------------------------------------------------------------------------------

Terminal selection:

1.2 terminal is good for 1.2mm diameter cartridge pins, automatic progressive die stamping production, high reliability material phosphorus copper, 24K gold plated surface

1.3 terminal is good for 1.3mm diameter cartridge pins, produced by high-precision turning from a block of phosphor copper with advanced CNC lathe, the surface of 24K gold plating

Most of the cartridge pins are 1.2mm diameter , but some are 1.3mm diameter , so the wrong terminal selection will seriously damage the cartridge, please confirm your cartridge pin diameter and then buy the corresponding, you can use vernier calipers to measure your cartridge pin’s diameter.

------------------------------------------------------------------------------