New 20/lot headshell 4pin connectors 5N Pure Silver litz leadwire 1.3 terminals

Type:  standard headshell 4-pin connector with 5N pure silver litz leadwire

Lot size:  20 pieces ( connectors with leadwires) per lot

Model:  HC4GSW13

This high quality 4-pins 24K GOLD plated standard connector fits most turntables with the S-Shaped tonearm and SME type 4 pin connection

All metal parts are made of high quality copper 

The connector fit most turntables with the S-Shaped, straight or SME type 4 pin connection tonearm with a standard H-4 Bayonet Mount. The S-shape H-4 type tonearm is the most commonly used tonearm system by turntable manufacturers like National, Panasonic, Technics, Sony, Telefunken, Denon, Sansui, Reloop, Pioneer, SME, DYNAMIC SPEAKER, Schneider, UNITRA etc., just to name a few. 

The connector dimensions are 8 mm diameter x 12 mm length

Assembled with our 5N Pure Silver litz lead wires

5N Pure Silver litz wire is the best wire for faster transmission speeds, lossless data and cleaner sound. It's 0.55mm outer diameter, litz construction 7 strands and each strand is 0.1mm diameter 99.999+% Pure soft annealed silver wires in oversized PTFE Teflon insulation. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. 99.999+% silver transmits electrical signals faster and with less distortion than ordinary OFC wires. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable. Our silver is produced using the most up to date continuous casting methods in one of the largest and most stringently tested facilities in the world.

Every piece leadwire is made of 2 pieces transparent 30AWG FURUKAWA 5N Pure Silver litz wires and litz construction for much more cleaner sound. 

Terminals are phosphor copper and silver plated for good electrical conductivity and non-allergy reaction.  Each terminal end is wrapped in color coded shrink tubing.

Terminals are hand soldered. Color-coded heat shrink is used at the cartridge end,  black heat shrink at the head shell end.

Application:  Connects 1.3mm pins cartridge to headshell, Color end is fitting diameter about 1.30~1.40mm pins on cartridge,  black end is fitting headshell 

Length: 2 inches (50mm) long with female connector sockets on each end

Mount on cartridge according to the color of shrink tubing:

BLUE = LG (left ground)

GREEN = RG (right ground)

WHITE = L (left positive)

RED = R (right positive)