New15set/lot 5N pure silver Tonearm wire 400/508mm long with 1.2/1.3 terminals

As you know, the pins on cartridges are much different indeed. Some pins' diameter is about 1.20mm, others about 1.30mm. So choice the right terminals is very important to cartridge, otherwise might damage to the cartridge. You are bidding on a lot of diameter 1.20 / 1.30mm cartridge pins fitting high quality headshell lead wires in the color or material shown above. These are brand new products in original factory's bulk package.

You are bidding on a lot of brand new high quality Tonearm wire in the color or material shown above. These are brand new products in original factory's bulk package.  

Type:  High quality 5N pure silver tonearm wires;

Lot size:  15 sets per lot

Every one set 5N pure silver tonearm wire is 4 pieces transparent 400mm long 30AWG 5N Pure Silver litz wire for a more cleaner sound. Every 30AWG 5N Pure Silver litz wire is 0.55mm outer diameter. It's litz construction 7 strands and each strand is 0.1mm diameter 99.999+% Pure soft annealed silver wires in oversized PTFE Teflon insulation. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. 99.999+% silver transmits electrical signals faster and with less distortion than ordinary OFC wires.  High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable. Our silver is produced using the most up to date continuous casting methods in one of the largest and most stringently tested facilities in the world.

All of the cartridge connector terminals were made from high quality Sn-P bronze with high conductivity 24K GOLD plating 

Sn-P bronze is an elastic copper-based alloy with the requirements of high accurate of dimension, good surface quality, excellent shape of strip and properties for production. It's excellent hardness, flexibility, transparency excellent introduction, when the temperature is very low power.

terminals dimensions: 1.2 terminals fits cartridge pins 1.2~1.3mm well

                                    1.3 terminals fits cartridge pins 1.3~1.4mm well

Terminals are hand soldered. Each terminal end is wrapped in color coded shrink tubing. Color-coded heat shrink is used at the cartridge end.

Application: Connects most cartridge to turntable,  It is designed for use inside the tonearm tube connecting the cartridge mount to the RCA jacks or terminal strip of the turntable.  

Length: 400 / 508 mm 

All components are RoHS Compliant.

Mount on cartridge according to the color of shrink tubing:

BLUE = LG (left ground)

GREEN = RG (right ground)

WHITE = L (left positive)

RED = R (right positive)