New 50pcs/lot high quality 330 / 400 / 508mm Tonearm 2channels shielded wire 1.2 / 1.3 cartridge clip

You are bidding on a lot of brand new high quality tonearm 2channels shielded wires in the color or material shown above. These are brand new products in original factory's bulk package.

Type:   Brand new high quality tonearm 2channels shielded wire;

Lot size:  50 pieces per lot

Application: Connects most cartridge to turntable,  It is designed for use inside the tonearm tube connecting the cartridge mount to the RCA jacks or terminal strip of the turntable. Low loss and excellent shielding are important for use with phono cartridges. Two channels, left and right.

Every one set 2channels shielded tonearm wire is 1 pieces AWG 32# 2channels shielded wire for a more cleaner sound. Low loss and excellent shielding are important for use with phono cartridges. Two channels, left and right.

2channels shielded wire specs:

- Rated temperature: 80℃

- Rated voltage: 30V

- Tinned copper wire spiral shield

- Passes UL VW-1 & CSA FT1 vertical flame test;

- 2 Cores

Stranded, tinned copper conductor

- AWG   32

- Construction(mm) 7/0.08

- Stranded Dia.(mm) 0.24

Colour-coded PVC insulation

- Min. Thickness (mm) 0.12

- Nom. Thickness (mm) 0.15

- Insulation Dia. (±0.05mm) 0.54

Assembly 2C

Direction S

Spiral Tinned Copper

- Construction(mm) 44+/-5/0.08

Colour-coded lead free PVC jacket

- Min. Thickness (mm) 0.18

- Nom. Thickness (mm) 0.22

- Dia. (±0.1mm) 1.68

All of the cartridge connector terminals were made from high quality Sn-P bronze with high conductivity 24K GOLD plating 

Sn-P bronze is an elastic copper-based alloy with the requirements of high accurate of dimension, good surface quality, excellent shape of strip and properties for production. It's excellent hardness, flexibility, transparency excellent introduction, when the temperature is very low power.

terminals dimensions: 1.2 terminals are inside diameter 1.20mm, fits pins 1.2~1.3mm well. 

                                    1.3 terminals are inside diameter 1.30mm, fits pins 1.3~1.4mm well

Terminals are hand soldered. Each terminal end is wrapped in color coded shrink tubing. Color-coded heat shrink is used at the cartridge end.

Application: Connects most cartridge to turntable,  It is designed for use inside the tonearm tube connecting the cartridge mount to the RCA jacks or terminal strip of the turntable.  

Length: 330 / 400 / 508 mm 

All components are RoHS Compliant.

Mount on cartridge according to the color of shrink tubing:

BLUE = LG (left ground)

GREEN = RG (right ground)

WHITE = L (left positive)

RED = R (right positive)