New 30set/lot high quality hand welded 1.2/1.3 terminal oxygen free copper (OFC) silver-plated AWG32# Tonearm wire 400/508mm long

As you know, the pins on cartridges are much different indeed. Some pins' diameter is about 1.20mm, others about 1.30mm. So choice the right terminals is very important to cartridge, otherwise might damage to the cartridge.

You are bidding on a lot of brand new high quality Tonearm wire in the color or material shown above. These are brand new products in original factory's bulk package.  

Type: High quality hand welded 1.2/1.3 terminal oxygen free copper (OFC) silver-plated AWG32# Tonearm wire;

Lot size: 30 sets per lot.  For example: if you buy 3 lots, you will receive 90 sets.

Each set tonearm wire: red, white, blue, green and black 5 pieces OFC silver-plated wires length of 400/508mm.

Each color tonearm wire is made up of soft and slender AWG32# (outside diameter 0.4mm only) oxygen free copper (OFC) silver-plated wire, and the cartridge’s end are manually welded with 1.2/1.3 terminals. Color heat shrink tubes are used to distinguish the sound channel for easy installation.

All of the cartridge connector terminals were made from high quality Sn-P bronze with high conductivity 24K GOLD plating 

Sn-P bronze is an elastic copper-based alloy with the requirements of high accurate of dimension, good surface quality, excellent shape of strip and properties for production. It's excellent hardness, flexibility, transparency excellent introduction, when the temperature is very low power.

terminals dimensions: 1.2 terminals fits cartridge pins 1.2mm well

                                       1.3 terminals fits cartridge pins 1.3mm well

Terminals are hand soldered careful. Each terminal end is wrapped in color coded shrink tubing. Color-coded heat shrink is used at the cartridge end.

Application: Connects most cartridge to turntable,  It is designed for use inside the tonearm tube connecting the cartridge mount to the RCA jacks or terminal strip of the turntable.  

Length: 400 / 508 mm 

All components are RoHS Compliant.

Mount on cartridge according to the color of shrink tubing:

BLUE    = LG (left ground)

GREEN = RG (right ground)

WHITE  = L (left positive)

RED      = R (right positive)