You are bidding on a lot of MM cartridge and headshells assembly in the color or material shown above. These are brand new products in original factory's bulk package.
Type: High output stereo moving magnetic cartridges + High quality Shiny Chromium plated standard 1/2' aluminum turntable headshell + Hi-Fi 5N pure silver litz leadwire assembly
Lot size: 10 pieces (MM cartridge and headshell assembly) per lot
High output stereo moving magnetic cartridge:
Compatible with all turntables that accept standard 1/2' headshell-mounted cartridges, easy to install;
Excellent sound quality and strong tracking ability;
Perfect as a replacement or backup cartridge;
Output voltage (at 1k Hz, 5 cm/sec): high output 4.5 mV +- 3dB, you will be able to enjoy powerful and satisfying sound;
Channel balance (at 1kHz): below 1 dB;
Channel separation (at 1kHz): more than 15 dB;
Frequency response: 20 ~ 20k Hz;
Tracking force: 3.0g (2.5 ~ 3.5g);
Stylus Tip: Top quality stereo transparent diamond stylus. The stylus tip is from a professional manufacturer who have supplied in the past 40 years to all the OEM manufacturers such as Philips PSR, TETRAD, ORTOFON, DUAL and many others. This stylus is improved according to our long term production experience, it can let your cartridge do wonderfully output. So we can assure you that we supply to you the same quality of tips as original even better.
Standard 1/2' aluminum turntable headshell
Material: Aluminum
Surface treatment: High quality MIRROR POLISHING AND PERFECT LUXURY Titanium/Chromium/Gold/Rose gold/Nostalgic antique plated.
Application: Headshell fits most turntables with the S-Shaped, straight or SME type 4 pin connection tonearm with a standard H-4 Bayonet Mount
Connector Type: 4 prong, H-4 Bayonet Mount, 4-pins gold plated
Headshell barrel size: 8mm diameter X 12mm length
5N Pure Silver litz wire is the best wire for faster transmission speeds, lossless data and cleaner sound. It's 0.55mm outer diameter, litz construction 7 strands and each strand is 0.1mm diameter 99.999+% Pure soft annealed silver wires in oversized PTFE Teflon insulation. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. 99.999+% silver transmits electrical signals faster and with less distortion than ordinary OFC wires. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable. Our silver is produced using the most up to date continuous casting methods in one of the largest and most stringently tested facilities in the world.
Every piece color lead wire is made of 2 pieces transparent 30AWG FURUKAWA 5N Pure Silver litz wires and litz construction for much more cleaner sound.
Wire length: 2 inches (50mm) long with female connector sockets on each end
The cartridge connector terminals were made from high quality Sn-P bronze with high conductivity 24K GOLD plating
Sn-P bronze is an elastic copper-based alloy with the requirements of high accurate of dimension, good surface quality, excellent shape of strip and properties for production.
Dimensions: inside diameter 1.20mm, fits pins 1.2~1.3mm well
Each terminal end is wrapped in color coded shrink tubing. Terminals are hand soldered. Color-coded heat shrink is used at the cartridge end, black heat shrink at the head shell end.
Application: Connects 1.2mm pins cartridge to headshell, Color end is fitting diameter about 1.20~1.30mm pins on cartridge, black end is fitting headshell
Length: 2 inches (50mm) long with female connector sockets on each end
Mount on cartridge according to the color of shrink tubing:
BLUE = LG (left ground)
GREEN = RG (right ground)
WHITE = L (left positive)
RED = R (right positive)
